Heat Flow Transport Model by Gauss-Seidel Type Iteration Methods for Gas and Solid Materials

Nurlaela Rauf; Heryanto Haeruddin; Roni Rahmat; Dahlang Tahir

doi:10.20527/flux.v18i1.10128

Heat Flow Transport Model by Gauss-Seidel Type Iteration Methods for Gas and Solid Materials

Nurlaela Rauf, Heryanto Haeruddin, Roni Rahmat, Dahlang Tahir

Abstract

Technological processes for modification of materials, deposition, and prevented fumes in the pyrolysis processes are used gases materials in the medium with vacuum pressure or atmospheric air pressure. Therefore, it is essential to understand heat flow transport for designing an eﬃcient reactor or find the substrate's excellent position in the reactor or furnace for growing materials. We evaluated the energy transfer phenomena in the form of temperature distribution and heat flow for various heating sources for the gases and solid materials by Gauss-Seidel equation. The thermal conductivity coefficient (k), number of heating sources, and position of heating sources show an essential parameter for transmitting the distribution of the heat. For high k value shows efficiently for heat transfer at low temperature due to the atom's position close each other. The heat also affects to the phonon and lattice vibration like a wave which successfully shows these phenomena in this study.

Keywords

heat transport

Full Text:

PDF

References

Al Amin, A., Sabri, L., Poole, C., Baig, T., Deissler, R.J., Rindfleisch, & Martens, M. (2018). Computational homogenization of the elastic and thermal properties of superconducting composite MgB2 wire. Composite Structures, 188, 313-329. https://doi.org/10.1016/j.compstruct.2017.12.060

Akgül, A., & Modanli, M. (2019). Crank–Nicholson difference method and reproducing kernel function for third order fractional differential equations in the sense of Atangana–Baleanu Caputo derivative. Chaos, Solitons and Fractals, 127, 10–16. https://doi.org/10.1016/ j.chaos.2019.06.011

Aoife, L., & Jerry, D.M. (2019). Can green gas certificates allow for the accurate quantification of the energy supply and sustainability of biomethane from a range of sources for renewable heat and or transport?. Renewable and Sustainable Energy Reviews, 115, 109347. https://doi.org/10.1016/j.rser.2019.109347

Basuki, I., Cari, & Suparmi. (2017). Visualization of heat transfer in material for varians of boundary value with Relaxation Iteration Gauss-Seidel method. Journal of Physics: Conf. Series, 795, 012017. https://doi.org/10.1088/ 1742-6596/795/1/012017

Berezansky, L., & and Braverman, E. (2020). Solution estimates and stability tests for linear neutral differential Equations. Applied Mathematics Letters, 108, 106515.

https://doi.org/10.1016/j.aml.2020.106515

Boland, J. (2002). The analytic solution of the differential equations describing heat flow in houses. Building and Environment, 37, 1027–1035.

https://doi.org/10.1016/S0360-1323(01)00098-1

Brun, J.L., & Pacheco, A.F. (2005). Reducing The Heat Transfer Through a Wall. Eur. J. Physics, 26, 11-18. https://doi.org/ 10.1088/0143-0807/26/1/002

Conte, D. (2020). Dynamical low-rank approximation to the solution of parabolic differential equations. Applied Numerical Mathematics, 156, 377–384.

https://doi.org/10.1016/j.apnum.2020.05.011

Da Silva, R., Prado, S.D., & Fernandes H.A. (2017). A new look on the stabilization of inverted pendulum with parametric excitation and large random frequencies: Analytical and numerical approaches. Commun Nonlinear Sci Numer Simulat., 51, 105–114.https:// doi.org/10.1016/j.cnsns.2017.04.002

Defraeye, T., Blockenc, B., & Carmeliet, J. (2013). Influence of uncertainty in heat–moisture transport properties on convective drying of porous materials by numerical modelling. Chemical Engineering Research and Design, 91, 36–42.https://doi.org/10.1016/j.cherd.2012.06.011

Dogu, Y., & Aksit, M.F. (2006). Brush Seal Temperature Distribution Analysis. J. Eng. Gas Turbines Power, 128, 599-609.

https://doi.org/10.1115/1.2135817

Farahani, S., Yerra, V.A., & Pilla, S. (2020). Analysis of a hybrid process for manufacturing sheet metal-polymer structures using a conceptual tool design and an analytical-numerical Modeling. Journal of Materials Processing Tech., 279, 116533.https://doi.org/ 10.1016/j.jmatprotec.2019.116533

Gao, R. (2016). Milne method for solving uncertain differential equations. Applied Mathematics and Computation, 274, 774–785.

https://doi.org/10.1016/j.amc.2015.11.043

Gregori, D., Scazzosi, R., Nunes, S.G., Amico, S.C., Giglio, M., & Manes, A. (2020). Analytical and numerical modelling of high-velocity impact on multilayer alumina/aramid fiber composite ballistic shields: Improvement in modelling approaches. Composites Part B, 187, 107830.https://doi.org/10.1016/j.compositesb.2020.107830

Hammer, Th. (2014). Atmospheric Pressure Plasma Application for Pollution Control in Industrial Processes. Contrib. Plasma Phys., 54, 187–201.

https://doi.org/10.1002/ctpp.201310063

He, T., & Wang, T. (2019). A three-field smoothed formulation for partitioned fluid–structure interaction via nonlinear block-Gauss–Seidel procedure. Numerical Heat Transfer, Part B: Fundamentals, 75, 198-216.

https://doi.org/10.1080/10407790.2019.1615786

Idesman, A., & Dey, B. (2020). New 25-point stencils with optimal accuracy for 2-D heat transfer problems. Comparison with the quadratic isogeometric elements. Journal of Computational Physics, 418, 109640.

https://doi.org/10.1016/j.jcp.2020.109640

Karami, R., & Kamkari, B. (2020). Experimental investigation of the effect of perforated fins on thermal performance enhancement of vertical shell and tube latent heat energy storage systems. Energy Conversion and Management, 210, 112679.

https://doi.org/10.1016/j.enconman.2020.112679

Klametsdal Ø.S., Rasmussen, A.F., Meyner, O., & Lie K.A. (2020). Efficient reordered nonlinear Gauss–Seidel solvers with higher order for black-oil models”, Comput Geosc., 24, 593-607.

http://dx.doi.org/10.1007/s10596-019-09844-5

Liu, Z., Wang, G., & Yi, J. (2020). Study on heat transfer behaviors between Al-Mg-Si alloy and die material at different contactconditions based on inverse heat conduction algorithm. Journal of Materials Research and Technology, 9, 1918-1928.

Luijendijk, E. (2019). Beo v1.0: Numerical model of heat flow and low-temperature thermochronology in hydrothermal systems. Geosci. Model Dev., 12, 4061–4073.https://doi.org/10.5194/gmd-12-4061-2019

Lu, K., Xu, H., He, H., Gao, S., Li, X., Zheng, C. Cheng, Y. (2020). Modulating Reactivity and Stability of Metallic Lithium via Atomic Doping”, J. Mater. Chem. A, 2020, 10363-10369.

https://doi.org/10.1039/D0TA02176H

Michael, S., & Alexandre, D. (2020). The effect of heating rate, particle size and gas flow on the yield of charcoal during the pyrolysis of radiata pine wood”, Renewable Energy, 151, 419-425. https://doi.org/10.1016/j.renene.2019.11.036

Mortazavi, M., & Moghaddam, S. (2016). Laplace transform solution of conjugate heat and mass transfer in falling film absorption process”, International Journal of Refrigeration, 66, 93-104. https:// doi.org/10.1016/j.ijrefrig.2016.02.013

Motlagh, M.B., & Kalteh, M. (2020). Simulating the convective heat transfer of nanofluid Poiseuille flow in a nanochannel by molecular dynamics method’, International Communications in Heat and Mass Transfer, 111, 104478.

https://doi.org/10.1016/j.icheatmasstransfer.2020.104478

Paradezhenko, G.V., Melnikov, N.B., & Reser, B.I. (2020). Numerical Continuation Method for Nonlinear System of Scalar and Functional Equation”, Computational Mathematics and Mathematical Physics, 60, 404-410.

Pu, B., & Yuan, X. (2019). The alternate iterative Gauss-Seidel Method for linear systems”, Journal of Physics: Conference Series, 1411, 012008.

Shen, Z., & Zhou, H. (2020). Predicting effective thermal and elastic properties of cementitious composites containing polydispersed hollow and core-shell micro-particles. Cement and Concrete Composites, 105, 103439.https://doi.org/10.1016/j.cemconcomp.2019.103439

Stanley, C.M. (2019). Specific Heat at Constant Pressure from First Principles: Contributions from Fully Anharmonic Vibrations. Mater. Res. Express, 6, 125924.

Tianbai, X., Kun, X., Qingdong, C., & Tiezheng, Q. (2018). An investigation of non-equilibrium heat transport in a gas system under external force ﬁeld. International Journal of Heat and Mass Transfer, 126, 362–379.

https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.035

Wu, P., Wang, Z., Li, X., Xu, Z., Yang, Y., & Yang, Q. (2020). Energy-saving analysis of air source heat pump integrated with a water storage tank for heating applications. Building and Environment, 180, 107029.https://doi.org/10.1016/ j.buildenv.2020.107029

Wu, S.L., Zhou, T., & Chen, X. (2020). A Gauss—Seidel Type Method for Dynamic Nonlinear Complementarity Problems. SIAM J. Control Optim., 58, 3389-3412.

https://doi.org/10.1137/19M1268884

www.EnggineeringToolBox.com (1), Thermal Conductivity of common Materials and Gases. https://www.engineeringtoolbox.com/thermal-conductivity-d_429.html (25 April 2020)

www.EnggineeringToolBox.com (2), Thermal Conductivity of Metals, Metallic Elements and Alloys. https://www.engineeringtoolbox.com/thermal-conductivity-metals-d_858.html (25 April 2020)

www.EnggineeringToolBox.com (3) Densities of Solids. https://www.engineeringtoolbox.com/density-solids-d_1265.html (25 April 2020)

Vitanov, P., Harizanova, A., Ivanova, T., & Dikov, H. (2014). Low-temperature deposition of ultrathin SiO2 films on Si substrates. J. Phys.: Conf. Ser., 514, 012010. https://doi.org/10.1088/1742-6596/514/1/012010

Zhang, C., Chang, J., Liu, M., Feng, S., Shi, W., & Bao, W. (2017). Effect of heat release on movement characteristics of shock train in an Isolator. Acta Astronautica, 133, 185–194. https://doi.org/ 10.1016/j.actaastro.2017.01.031

Zhang, Y., Gao, J., & Huang, Z. (2017). Hamming method for solving uncertain differential equations. Applied Mathematics and Computation, 313, 331–341.

https://doi.org/10.1016/j.amc.2017.05.080

DOI: http://dx.doi.org/10.20527/flux.v18i1.10128