Acoustic Absorption Coefficient of Oil Palm Midrib Composite
Abstract
Composite from oil palm midrib waste is one of the natural fiber materials that can reduce noise. Its material sample composite with gypsum was placed inside an impedance tube, which fitted with the mass of palm midrib mill, i.e., 0.1 kg, 0.15 kg, and 0.2 kg. Next, sound absorption coefficients were measured based on the two farthest ranges of the sound-receiving microphone, i.e., range A, which was 45 cm from the sample, and range B, which was 55 cm from the sample. Sound source frequencies were used, i.e., 125 Hz, 250 Hz, 500 Hz, 1000 Hz, and 2000 Hz. This research found that the link between sound absorption coefficients and the mass differences of each sample was not significantly affected. The highest sound absorption coefficient is 0.979 in distance A for oil palm midrib sample mass of 0.15 kg, far bigger than gypsums on the same frequency (125 Hz), which is 0.29. In conclusion, sound absorption on oil palm midrib was better because it has higher sound absorption coefficients than gypsum and a minimum sound absorption coefficient standard of 0.15. In the future, oil palm midribs might be widely used as sound-absorbing materials based on their advantages.
Keywords
Full Text:
PDFReferences
Arenas, J. P., del Rey, R., Alba, J., & Oltra, R. (2020). Sound-absorption properties of materials made of esparto grass fibers. Sustainability (Switzerland), 12(14). 1-10. https://doi.org/10.3390/su12145533
Asade, F., & Isranuri, I. (2013). Perancangan tabung impedansi dan kajian eksperimental koefisien serap bunyi paduan aluminium-magnesium. Jurnal E-Dinamis, 6(2). 90-98.
Bhattacharya, S. S., & Bihola, D. V. (2019). Design and construction of impedance tube for sound absorption coefficients measurements. International Journal of Advance Research in Science and Engineering, 8(9), 93-104.
British Standards Institution. (1997). Acoustics: sound absorbers for use in buildings: rating of sound absorption. British Standards Institution.
Ewe, L. S., Yew, W. K., Woon, H. S., & Ibrahim, Z. (2023). Sound-Absorbing Material Based Oil Palm Frond Natural Fibres. Sains Malaysiana, 52(7), 2103–2114. https://doi.org/10.17576/jsm-2023-5207-16
Hemmat, W., Hesam, A. M., & Atifnigar, H. (2023). Exploring Noise Pollution, Causes, Effects, and Mitigation Strategies: A Review Paper. European Journal of Theoretical and Applied Sciences, 1(5), 995–1005. https://doi.org/10.59324/ejtas.2023.1(5).86
International Organization for Standardization. (2023). Acoustics-Determination of acoustic properties in impedance tubes-Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance. Geneva: Author https://www.iso.org/standard/81294.html
Jacewicz, E., Alexander, J. M., & Fox, R. A. (2023). Introduction to the special issue on perception and production of sounds in the high-frequency range of human speech. The Journal of the Acoustical Society of America, 154(5), 3168–3172. https://doi.org/10.1121/10.0022496
Jang, E. S. (2023). Sound absorbing properties of selected green material—A Review. In Forests (Vol. 14, Issue 7). Multidisciplinary Digital Publishing Institute (MDPI). https://doi.org/10.3390/f14071366
Karki, T. B., Manandhar, R. B., Neupane, D., Mahat, D., & Ban, P. (2024). Critical analysis of noise pollution and its effect on human health. International Journal of Educational and Life Sciences, 2(2), 161–176. https://doi.org/10.59890/ijels.v2i2.1372
Martin, Y. (2019). Composition of mixing gypsum additives as environmentally friendly material in tropical soil to reduce grounding resistance. IOP Conference Series: Earth and Environmental Science, 314(1). 1-8. https://doi.org/10.1088/1755-1315/314/1/012019
Momoh, E. O., & Osofero, A. I. (2020). Recent developments in the application of oil palm fibers in cement composites. In Frontiers of Structural and Civil Engineering (Vol. 14, Issue 1, pp. 94–108). https://doi.org/10.1007/s11709-019-0576-9
Mutuk, T., Arpacioğlu, K., Alişir, S., & Demir, G. (2023). Thermal and mechanical evaluation of natural fibers reinforced gypsum plaster composite. Journal of Metals, Materials and Minerals, 33(1), 116–123. https://doi.org/10.55713/jmmm.v33i1.1669
Putra, A.S., (2020). Penentuan Koefisien Serap Bunyi Papan Partikel dari Limbah Pelepah Kelapa Sawit. Suara Teknika, 7(2), 182–185.
Putra, A., Or, K. H., Selamat, M. Z., Nor, M. J. M., Hassan, M. H., & Prasetiyo, I. (2018). Sound absorption of extracted pineapple-leaf fibres. Applied Acoustics, 136, 9–15. https://doi.org/https://doi.org/10.1016/j.apacoust.2018.01.029
Raja, P. M., Rangkuti, I. U. P., Hendra Ginting, M., Giyanto, & Siregar, W. F. (2021). Preparation and characterization of cellulose microcrystalline made from palm oil midrib. IOP Conference Series: Earth and Environmental Science, 819(1). 1-7. https://doi.org/10.1088/1755-1315/819/1/012002
Sampson, D. H. (2011). Gypsum: Properties, production and applications. New York: Nova Science Publishers.
Senewa, O., Wirianata, H., & Hartati, R. M. (2023). Pengaruh Pelepah Under Pruning terhadap Produktivitas Kelapa Sawit. Journal Agroista: Vols. 1, No. 1.
DOI: http://dx.doi.org/10.20527/flux.v22i1.20339
Article Metrics
Abstract view : 188 timesPDF - 198 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Association with:
Indexed by:

Jurnal Fisika FLux: Jurnal Ilmiah FMIPA Universitas Lambung Mangkurat is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.










