PENGARUH JUMLAH DAN SUDUT PEMASANGAN SUDU TERHADAP DAYA TURBIN SAVONIUS

Purwoko Purwoko

Abstract


The problem in Energy conservation is finding new opportunities for high-efficiency energy generation including wind power generating machines. Aims of this study to determine the effects of blade number and curv angle of blade mounting on the output power of a Savonius type wind turbine. This low speed wind turbine is intended to get energy at the top of a multi-storey building in an urban area. Tests were carried out on a laboratory scale, using savonius wind turbines with 400 mm diameter and 500 mm height. The driving wind speed of the turbine is set between 1.5 to 8.5 m / s. While the number of blades used is 2 types, namely rotor with three blades and rotor with 4 blades, each of which is tested on 3 different types of curv angle blade.
The investigation results are expected to show that the wind tubing from each experiment will give different characteristics. This investigation results that there was increasing in efficiency in the savonius turbine with blades. The highest rotation and power occur when the turbine uses 2 blades and -50 curv angle of blade mounting

Keywords


wind turbine, savonius, blade.

References


B. Altan and M. Atilgan, A Study on Increasing The Performance of Savonius Wind Rotor. Journal of Mechanical Science and Technology 26, 2012, 1493-1499.

Dayan, Wind energy in buildings. Refocus March/April 2006:33-8.

N. H. Mahmoud, A. A. El Haraoun, E, Wahba, M.H. Nasef, An Experimental Study on Improvement of Savonius Rotor Performance, Alexandria Engineering Journal, 19-25.

R.N Hidayatullah dkk, DesainAlat Energi Angin Tipe Savonius sebagai Pembangkit Listrik di Pulau Bawean, Jurusan Kelautan ITS, Surabaya, 1-10 , 2010

S. Martens, Wind Energy in Urban Areas, Refocus March/April 2012:22-24.

W. T. Chong, A. Fazlizan, S. C. Poh, K. C. Pan, H. W. Ping, Early development of an innovative building integrated wind, solar and rain water harvester for urban high rise application, Energy and Buildings 47, 2012, 201-207.

Y. X. Yao, Z. P. Tang, X. W. Wang, Design Based on Parametric Analysis of Drag driven VAWT with a tower cowling, Journal of Wind Engineering and Industrial Aerodynamics, 116, 2013, 3239




DOI: http://dx.doi.org/10.20527/infotek.v21i2.10036

Article Metrics

Abstract view : 2065 times
PDF - 136 times PDF (Bahasa Indonesia) - 316 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 INFO-TEKNIK