KONSTRUKSI INSTALASI PIPA MIGAS BAWAH LAUT  DI TELUK BALIKPAPAN

Sulardi Sulardi

doi:10.20527/infotek.v22i2.12389

KONSTRUKSI INSTALASI PIPA MIGAS BAWAH LAUT DI TELUK BALIKPAPAN

Sulardi Sulardi

Abstract

The purpose of this study is to describe the use of material specifications and methods for the construction of underwater oil and gas pipeline installations. This research uses an applied research method with a case study approach in the context of replacing an underwater oil and gas pipeline from the North Penajam Paser coast to the Balikpapan refinery. The results of the research that can be achieved are that the 399 meter long underwater pipe has been replaced with standard API 5L Grade X52 carbon steel specifications and the large lay method by maximizing pipe welding and technical inspection of the welding results on board. Based on the results of this study, it is also recommended that the material specifications and working methods of underwater pipe installation construction work well are applied in similar work areas.

Keywords

Submarine pipeline, API 5L specification, lay large

Full Text:

PDF

References

API RP 1111, 1999, Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipeline (Limit State Design), American Petroleum Intitute

B. Rachmat, C. Purwanto, P. Raharjo, 2011, Kajian Identifikasi Infrastruktur Jaringan Pipa Migas Bawah Laut di Perairan Sebelah Utara Provinsi Banten, Jurnal Geologi Kelautan Volume 9, No. 2, Agustus 2011

DNV-OS-F101, 2007, Submarine Pipeline Systems, DNV GL AS

Keputusan Menteri Pertambangan dan Energi No.300.K/38/M.PE/1997, 1997, Keselamatan Kerja Pipa Penyalur Minyak dan Gas Bumi, Departemen Pertambangan dan Energi

Peraturan Menteri Perhubungan Republik Indonesia No. PM 129 Tahun 2016, Tentang Alur Pelayaran di Laut dan Bangunan dan/ atau Instalasi Perairan

Sulardi, 2020, Proteksi Pipa Bawah Laut Dengan Metode Articulated Concrette Block Mattresses, Jurnal Info Teknik Volume 21 No. 1 Juli 2020, Universitas Lambung Mangkurat, Banjarmasin.

Sulardi, 2020, Teknik Material, Penerbit Nusa Litera Inspirasi, Kabupaten Cirebon, Indonesia

Apri Malani Putri, dkk, 2012, Studi Laju Korosi dan Surface Morfologi Pipa Bawah Laut API 5L Grade X65 Dengan variasi Sudut Bending, Jurnal Teknik ITS Vol. 1

DOI: http://dx.doi.org/10.20527/infotek.v22i2.12389

DOI (PDF): http://dx.doi.org/10.20527/infotek.v22i2.12389.g7760