ANALISIS DAN PERANCANGAN ALAT ASAP CAIR MENGUNAKAN SISTEM PENDINGIN KONDENSOR TIPE SPIRAL
Abstract
The research method is by designing tools, and cutting/making liquid smoke tools, then drying them in the sun to be completely dry, Weighing the coconut material before putting it into combustion, assembling and connecting the house pipe hose from the reactor to the tar to the condenser pipe, making sure there are no the leak between the connections, before being put in the combustion furnace, turn on the fire in the reactor tube, install the condenser pipe in the condenser tube and fill the water in the condenser tube, record the results of liquid smoke every 8 hours and fill the material into the combustion tube.
From the results of the research that has been carried out, there are differences in the results of liquid smoke obtained, then the charcoal results obtained, there is a difference in weight produced between the previous tool and the tool that is now designed, the most influencing factor is the condenser design, where the condenser can cool the smoke that comes out , due to the long cooling cycle that affects the results. The results obtained on the previous tool were 3.754 ml of liquid smoke, 6.5 kg of residual charcoal, and liquid smoke yield of 12.5% with a burning time of 48 hours, and the production rate of liquid smoke was 78.2 ml/hour. The results of the research obtained on the new tool produced 7.095 ml of liquid smoke, 5.6 kg of residual charcoal, and 23.6% yield of liquid smoke with a burning time of 48 hours, and the production rate of liquid smoke was 147.8 ml/hour.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Fathussalam, M., Putranto, A. W., Argo, B. D., Harianti, A., Oktaviani. A. Puspaningarum, F. P. Putri, S. L. O., 2019. Rancang Bangun Mesin Produksi Asap Cair Dari Tempurung Kelapa Berbasis Teknologi Cylone- Redistillation. Jurnal Ilmiah Rekayasa dan Biosistem 7(2): 148-156.
Guillen, M. D. 2001. Carbohydrate And Nitrogenated Coumpounds In Liquid Smoke Flavoring. J agric Food Chem 49: 2395-2403.
Guenther, E. 2011. Minyak Atsiri Jilid 1. Universitas Indonesia. Jakarta.
Hanafi, R. B. 2014. Analisa Kondensor Bentuk Serpentine Terhadap Volume Hasil Pada Alat Asap Cair. Skripsi. Fakultas Teknik Universitas Muria. Kudus.
Hafiz, R. C. A. 2012. Pembuatan Dan Pengujian Kondensor Tipe Spiral Untuk Alat Penghasil Asap Cair. Skripsi. Politeknik Negri Teknik Konversi Energi. Bandung.
Hasan, Iqbal, (2001). Pokok-Pokok Materi Statistik 1 (Statistik Deskriptif). PT Bumi Aksara. Jakarta.
Holman, J.P, 1994. Perpindahan Kalor, Edisi Keenam, Alih Bahasa Ir. E. Jasjfi, Msc, Erlangga, Jakarta.
Johansah, E. A. 2017. Perancangan Pirolisis Asap Cair Berkapasitas 100Kg/Peroses Bahan Baku Sekam Padi. Skripsi. Universitas Muhammadiyah. Malang.
Junaidi, A. B. Abdullah, Santoso, U. T. 2019. Potential Of Smoke In Wood Charcoal Production Of Ranggang Village Tanah Laut Model. Jurnal Konversi 8(1): 39-43.
Luditama, C. 2006. Isolasi Dan Pemurnian Asap Cair Berbahan Dasar Tempurung Dan Sabut Kelapa Secara Pirolisis Dan Distilasi. Skripsi. Departemen Teknologi Industri Pertanian, Fakultas Teknologi Pertanian. IPB.
DOI: http://dx.doi.org/10.20527/infotek.v23i2.14418
DOI (PDF (Bahasa Indonesia)): http://dx.doi.org/10.20527/infotek.v23i2.14418.g8703
Article Metrics
Abstract view : 253 timesPDF (Bahasa Indonesia) - 251 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 INFO-TEKNIK
This work is licensed under a�Creative Commons Attribution 4.0 International License.�
Indexed By:
Citation :
SINTA 6 mulai Vol. 19 No. 2 2018 (SK NO. 164/E/KPT/2021)GOOGLE SCHOLAR : Sitasi = 78, H-index = 5, i10-index = 2
IPI :� Artikel = 100
IOS 3969 : Artikel = 239
�