ANALISIS EMISI GAS BUANG PADA MESIN KONVENSIONAL SILINDER TUNGGAL

Bambang Hertomo

doi:10.20527/infotek.v18i1.3885

ANALISIS EMISI GAS BUANG PADA MESIN KONVENSIONAL SILINDER TUNGGAL

Bambang Hertomo

Abstract

The transportation sector consisting of cars and motorcycles annually increases, so the resulting exhaust gas keeps increasing. Exhaust gases that pollute the environment consist of CO and unburner HC, this is harmful to the environment. Objective to know the optimum value of CO and HC emissions when using fuel with octane value 88 and 90 with main jet size 72 and 105. What is the optimum change of CO and HC emissions at 4000rpm up to 9000rpm with octane fuel 88 and 90 Constant speed method with engine speed ranging from 4000rpm up to 9000rpm used for exhaust emissions. Results for main jet 72 octane 88 value 3.19% CO, 264,62ppm and optan 90 value 3.09% CO 242,29ppm. For main jet 105 octane 88 value 3.36% CO, 278,62ppm and octane 90 value 252,62ppm HC.

Keywords

gas flue, single cylinder, constant speed

Full Text:

PDF

References

Danar Wijayanto, “Studi eksperimental pengaruh variasi diameter main jet terhadap unjuk kerja dan gas buang dengan bahan bakar premium-etanol 30% (E30). Surabaya, 2004.

Winarto, Husin, Sudibyo,” Pengaruh bahan bakar premium, pertamax, pertamax plus dan variasi rasio kompressi terhadap kadar emisi gas buang CO dan HC pada suzuku shogun FL 125 SP. JIPTEK, Vol VII no 12013, hal 20-27

Trio Bagus P, “ Perbedaan performa motor berbahan bakar premium 88 dan motor berbahan bakar pertamax 92. Semarang,2013

Yuniarto Agus W, ,” Motor bakar 1” Jurusan Teknik Mesin Politeknik Negeri Malang, 2012, hal 76

Pulkrabek W.W (2005), “ Engineering fundamentas of the internal combustion engine” Prentice Hall International, Inc, 2005, pp. 276

Anonim, “Yamaha Manual book, 2011 (wiring fuel injection System), Jakarta,

DOI: http://dx.doi.org/10.20527/infotek.v18i1.3885

DOI (PDF): http://dx.doi.org/10.20527/infotek.v18i1.3885.g3519