B SERIES ENGINE PROPELLER MATCHING Studi Kasus Kapal Kontainer 100 TEUs

nurhadi nurhadi; Sumarsono Sumarsono

doi:10.20527/infotek.v18i2.4347

B SERIES ENGINE PROPELLER MATCHING Studi Kasus Kapal Kontainer 100 TEUs

nurhadi nurhadi, Sumarsono Sumarsono

Abstract

The alignment of the propulsion system on the vessel will greatly affect the magnitude of the resulting effectiveness to the speed of the vessel. To get a good system required a synchronization between the performance of propellers with the ship propulsion engine. Alignment that commonly known as engine propeller matching is done by finding the intersection between propeller characteristic graph with Thrust load coefficient at the operational point. The engine is adjusted as needed and can be optimally utilized based on the needs and characteristics of propeller.

This paper will present propeller matching engines of propeller type B-Series 4-65 used on 100 TEUs Container Ships. Based on the load calculation results obtained propeller efficiency at 12 knots speed is only 0.43 far from the maximum efficiency that can be obtained. By using CAT 3516B engine type maximum speed 100% MCR that can be reached is 12 knots in rough hull condition.

Keywords

B-series, propeller, engine matching, container ships

Full Text:

PDF

References

ITTC (2002) ‘Testing and Extrapolation Methods Propulsion, Propulsor Open Water Test’, (Revision 01), p. 7.5-02-03-02.1.

Setyo L (2015) ‘Sinkronisasi Propeller Dengan Mesin Induk Pada Kapal Ikan Untuk Meningkatkan Efisiensi dan Kinerja’ Wave, Vol. 9 (No 02), pp. 19–24.

Habibi and Nurhadi (2016) ‘Analisa Pemilihan Propeller Tipe B- Series Pada Kapal Feri Ro-Ro 600 Gt Dengan Menggunakan Aplikasi Matchpro’, Wave, Vol. 10 (No 02), pp. 75–81.

Abidin, M. Z., Adji, S. W. and Arief, I. S. (2012) ‘Analisa Performance Propeller B-Series dengan Pendekatan Structure dan Unstructure Meshing’, Jurnal Teknik ITS, 1(1), pp. 241–246.

Kristensen, H. O. and Lützen, M. (2012) ‘Prediction of resistance and propulsion power of ships’, Project no. 2010-56, Report 4 - Resistance and Propulsion Power - FINAL - October 2012.pdf.

Carlton, J. (2012) Marine Propellers and Propulsion, second edition, Elsevier, Oxford.

Ventura, M. (2010) ‘Estimation Methods for Basic Ship Design’, 202.114.89.60, pp. 1–61.

Specialist Committee of 23rd ITTC (2002) ‘Testing and Extrapolation Methods Resistance Uncertainty Analysis, Example for Resistance Test’, (Revision 01), p. 7.5-02-02-02 page1-18.

Bernitsas, M. M., Kinley, P. and Ray, D. (1981) ‘KT, KQ and Efficiency Curves for The Wageningen B-Series Propellers’, Michigan.

Journée, J. M. J. (2000) ‘Program Propol’. Wageningen.

http://www.bmgs.com.tr/doc/GucSistemleri/Marin/Marine-Engines/3516B/3516B-2000-BKW-1925-RPM-SPEC.pdf diunduh pada Oktober 2017.

DOI: http://dx.doi.org/10.20527/infotek.v18i2.4347

DOI (PDF): http://dx.doi.org/10.20527/infotek.v18i2.4347.g3857