DESAIN DAN SIMULASI PEMOTONGAN WIRE CUT DIES PRESS TOOL OUTSIDE DIAMETER MICROMETER SPANNER

Agus Dani

Abstract


Micrometer spanner is a tool that calibrate the micrometer in order to provide
precise measurement results. Size of micrometer spanner is relatively small,
making it easy lose and easily damaged. Micrometer calibration performed with
improper equipment will cause the micrometer not to be precise. This research
aims to obtain dies design and simulation process of making dies press tool
micrometer spanner by using CAD CAM software. The results of the study are
presstool dies design, simulation of wire cut process and G Code of CNC wire cut.

Keywords


dies, press tool, outside diameter micrometer spanner

Full Text:

PDF

References


Arifin, Fatahul. 2008. Perencanaan Alat Penempat dan Press Tool.

http://dokumen.tips/documents/pengertian-press-tool.html diakses pada 23

Mei 2017 di Malang.

Hurst, S Kenneth. 1999. Prinsip-Prinsip Perancangan Teknik. England: Langford

Lane Kidlington.

Budiarto. 2002. Perancangan Peralatan Pencetak. Bandung: Politeknik

Manufaktur

Wilson, W. Frank 1984. Fundamental of Tool Design. New Delhi: Prentice

Hall of India Private Limited.

http://www.insinyoer.com/prinsip-kerja-wire-cut-machining diakses pada 19

Pebruari 2018 di Malang.

https://ssgedm.en.made-in-china.com diakses pada 19 Pebruari 2018 di Malang.

https://www.mechanicaldesignforum.com diakses pada 19 Pebruari 2018 di

Malang.

http://www.intellectualventureslab.com diakses pada 19 Pebruari 2018 di Malang.




DOI: http://dx.doi.org/10.20527/infotek.v19i1.5140

DOI (PDF): http://dx.doi.org/10.20527/infotek.v19i1.5140.g4604

Article Metrics

Abstract view : 14 times
PDF - 114 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 INFO-TEKNIK

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

joomla
statistics View My Stats

Indexed By:

 

Citation :

SINTA Grade 5 (Arjuna 44,06) :

GOOGLE SCHOLAR : Kutipan = 24, H-index = 3, i10-index = 0

IPI :  Artikel = 100

IOS 3969 : Artikel = 239