PEMBUATAN DAN KARAKTERISASI MATERIAL KOMPOSIT SERAT IJUK (Arenga pinnata) SEBAGAI BAHAN BAKU COVER BODY SEPEDA MOTOR

Achmad Kusairi Samlawi; Yulian Firmana Arifin; Pandu Yuda Permana

doi:10.20527/infotek.v18i2.4352

PEMBUATAN DAN KARAKTERISASI MATERIAL KOMPOSIT SERAT IJUK (Arenga pinnata) SEBAGAI BAHAN BAKU COVER BODY SEPEDA MOTOR

Achmad Kusairi Samlawi, Yulian Firmana Arifin, Pandu Yuda Permana

Abstract

The purpose of this research is to know the influence of composition of mass fraction between filler and matrix to mechanical strength of composite material utilizing fibers fiber (arenga pinnata) as filler with polyester resin matrix, composition of fiber fraction mass and polyester resin is 30%:70%, 40%: 60% and 50%: 50% with fiber angle orientation: 0; 0; 0; 0, using the Hand Lay Up making composite methode. Impact test is done with ASTM D5942-96 standard and Tensile Testing is done with ASTM D638-03 standard. Impact test results show that all composition of mass fraction have value Energy impact above Energy impact Cover Body Motorcycle Brand X used as comparative material, 50%: 50% mass fraction composition yield the highest impact energy value equal to 198,75 Joule / cm2. Tensile Test showed the composition of mass fraction 50%: 50% yield value of tensile strength equal to 27,09 MPa is the value of tensile strength most closely to value of tensile strength of comparative material of 30,24 MPa, Tensile Test also shows all composition of mass fraction have the percentage of length increase above the percentage of comparative material, the composition of 50%: 50% mass fraction yields the highest percentage of 4.02%. This research concludes that fiber composite material (arenga pinnata) with 50%: 50% mass fraction composition is feasible to be used as an alternative material Cover Body Motorcycles.

Keywords

Fibers Fiber, Mass Fraction, Composite, Impact Energy, Tensile Strength

Full Text:

PDF

References

Arifin, Y.F., Syauqiyah. I., Samlawi, A.K., Ni’mah, L., 2016 : Utilization of Fly Ash, Palm-Pressed Fibers, Oil Palm Shell, and Empty Fruit Bunches of Oil Palm in Lightweight Concrete. 3rd INTERNATIONAL CONFERENCE ON “EMERGING TRENDS IN ACADEMIC RESEARCH ETAR-2016

Dian Prasetyo, Yuyun Estriyanto dan Budi Harjanto, 2012. “Pemanfaatan Serat Ijuk Sebagai Bahan Gesek Alternatif Kampas Rem Sepeda Motor “ Skripsi Prodi Pendidikan Teknik Mesin, Universitas Sebelas Maret, Surakarta.

Direktorat Jenderal Perkebunan, 2014. Statistik Perkebunan Indonesia, Kelapa sawit 2013-2015. Kementerian Pertanian Republik Indonesia.

Ginting, M,K, 2012, “Validasi Metode LC-MS/MS Untuk Pennetuan Senyawa Asam Trans, Trans-MUkonat, Asam Hippurat, Asam 2-Metil Hippurat, Asam 3-Metil Hippurat, Asam 4-Metil Hippurat Dalam Urin Sebagai Biomarker Paparan Benzena, Toluena, Dan Xilena”, Skripsi Prodi Kimia, FMIPA, UI, Depok.

Jamasri, 2008. “ Prospek Pengembangan Komposit Serat Alam Di Indonesia”. Pengukuhan Guru Besar Fakultas Teknik Universitas Gajah Mada

Odian, G., 2004, “Principles Of Polymerization”, 4th ed., Wiley-Interscience, A John Wiley & Sons, Inc., Publication, New Jersey.

Samlawi, A.K., and Lailan Ni’mah. (2015) "Utilization Fibers and Palm Kernel Shells and Tapioca Adhesive as Matrix in the Manufacture of Composite Boards as an Alternative Raw Material in Furniture Industry." International Journal of ChemTech Research. Vol. 8, No. 4 (2015) ISSN : 0974-4290 Coden (USA) : IJCRGG

Samlawi, A.K, dan Yasmina, R. (2016) “Pembuatan Bio Metal-Matrix Composites (Mmcs) Sebagai Bahan Gesek Alternatif Rem Tromol Yang Ramah Lingkungan Dengan Memanfaatkan Serat Serabut Kelapa Sawit Dan Limbah Paduan Aluminium (Al)” Laporan Penelitian Fakultas Teknik Universitas Lambung Mangkurat.

Siagian, K.A., 2010, “Pemanfaatan Limbah Plastik Polietilena (PE) Sebagai Matriks Komposit Dengan Bahan Penguat Serat Kaca”, Skripsi S1 Departemen Kimia, USU, Medan.

Sinaga, F.R.J., 2009, “Pra Rancangan Pabrik Pembuatan Phthalic Acid Anhydride Dengan Metode Oksidasi Ortho Xylene Dengan Kapasitas 120.000 Ton/Tahun, Tugas Akhir, Prodi TeknikKimiaEkstensi, FT, USU, Medan.

Varia,H.J., 2009, “Study Awal Pengaruh Kadar Asam Lemak Minyak Kedelai Terhadap Karakteristik Coating Primer”, Master Thesis Magister Teknik Korosi dan Proteksi Logam, Teknik Metalurgi dan Material, UI, Depok.

Franklin Donald Izaak, Fentje A. Rauf, Romels Lumintang (2013), ”Analisis sifat mekanik dan daya serap air material komposit serat rotan, politeknik negeri bengkalis.

Andi Alifuddin., 2014, “Pengaruh Penambahan Serat Ijuk Terhadap Peningkatan Kuat Tarik Pada Campuran Beton Aspal Denganpendekatan Kepadan Mutlak”, Universitas Briwijaya Malang Program Dokter Teknik Sipil.

Astute arif, musrizal muin, syahidah., 2006,” sifat fisik ijuk dan potensinya sebagai perintang fisik serangan rayap tanah

DOI: http://dx.doi.org/10.20527/infotek.v18i2.4352

DOI (PDF): http://dx.doi.org/10.20527/infotek.v18i2.4352.g3862