Pelatihan Perencanaan dan Pengendalian Mutu Beton dengan Optimalisasi Potensi Material Lokal/Limbah Industri di SMK Negeri 2 Banjarbaru Kalimantan Selatan

Ratni Nurwidayati, Nursiah Chairunnisa, Ade Yuniati Pratiwi, Mariamah Mariamah, Anita Oktavia

Abstract


SMK Negeri 2 Banjarbaru has two competencies from their expertise packages, the Construction and Property Business and Modeling Design and Building Information. However, the academic community lacks knowledge about the procedures for mixing normal concrete and concrete using local waste and the procedures for testing destructive and non-destructive concrete. One of the wastes used is fly ash. Tests for concrete quality control can be carried out by two methods: destructive and non-destructive tests. The destructive test is carried out with a compressive strength test and a tensile strength test of concrete/concrete splitting strength, while a non-destructive test is a hammer test. So that the solution offered is to provide training on planning and quality control of concrete by optimizing the potential of local materials/industrial waste. After the event, the academic community of SMKN 2 Banjarbaru has increased concerning normal concrete mixing and the use of local waste according to SNI standards and quality control of concrete testing in the field using destructive and non-destructive testing methods.

Full Text:

PDF

References


Hadori, Ahmad., Pranoto, Yudi., Sutarto, Tommy E. (2015). Pengujian Kuat Tekan Beton dengan Penambahan Fly Ash dan Admixture Superplasticizer. Jurnal Inersia. Vol. 7, pp. 50-55.

Hardian, Ludfy., Kurniawan, Erik., Susilorini, Retno., Santosa, Budi. (2018). Efektivitas Uji Tidak Merusak dan Uji Merusak pada Dinding Bata Beton Hasil Perbaikan dengan Additive Kimiawi di Daerah Rawan Rob. Jurnal Teknik Sipil Unika Soegijapranata Semarang. Vol. 2, no. 1, pp 33-40.

Lan, W. and Yuansheng, C. (2007). The Application and Development of Fly Ash in China. in 2007 World of Coal Ash (WACO), pp. 2–9.

Neville, M. and Brooks, J. J. (2010). Concrete Technology. Second. Prentice Hall.

Nidheesh, P. V. and Kumar, M. S. (2019). An overview of environmental sustainability in cement and steel production. J. Clean. Prod. Vol. 231, pp. 856–871, doi: 10.1016/j.jclepro.2019.05.251.

Oss, H. G. Van and Padovani, A. C. (2002). Cement manufacture and the environment - Part I: Chemistry and technology. J. Ind. Ecol. Vol. 6, no. 1, pp. 89–105, 2002, doi: 10.1162/108819802320971650.

Pal, A. (2018). Developing Low-Clinker Ternary Blends for Indian Cement Industry. J. Inst. Eng. Ser. A. Vol. 99, no. 3, pp. 433–447, doi: 10.1007/s40030-018-0309-4.

Peng, J., Huang, L., Zhao, Y., Chen, P., Zeng, L. and Zheng, W. (2013). Modeling of carbon dioxide measurement on cement plants. Adv. Mater. Res. Vol. 610–613, pp. 2120–2128, doi: 10.4028/www.scientific.net/AMR.610-613.2120.

Ribowo, Anggraini Budi., Niken, Chatarina., Widyawati, Ratna. (2020). Pengaruh Kondisi Lingkungan pada Kualitas Beton (Studi Kasus RSP Universitas Lampung). Jurnal Ilmiah Fakultas Teknik Universitas Lampung. Vol. 24, No. 3, pp 58-61.

Schmidt Hammer Test. Diakses dari https://teguhprimatama.co.id/menguji- kekuatan-beton-dengan-hammer-test/ tanggal 28 Februari 2022.

Shanks, W., Dunant, C. F., Drewniok, M. P., Lupton, R. C., Serrenho, A. and Allwood, J. M. (2018). How much cement can we do without? Lessons from cement material flows in the UK. Resour. Conserv. Recycle. Vol. 141, pp. 441–454, 2019, doi: 10.1016/j.resconrec.2018.11.002.

Wardani, S. P. R. (2008). Pemanfaatan Limbah Batubara (Fly Ash) untuk Stabilisasi Tanah maupun Keperluan Teknik Sipil Lainnya dalam Mengurangi Pencemaran Lingkungan. Semarang.




DOI: https://doi.org/10.20527/ilung.v2i2.5790

Refbacks

  • There are currently no refbacks.