Development of Electronic Modules Based on STEM to Train Students' Creativity: Validity and Practicality Analysis

Melisa Melisa; Eko Susilowati; Dewi Dewantara

doi:10.20527/bipf.v9i3.10440

Development of Electronic Modules Based on STEM to Train Students' Creativity: Validity and Practicality Analysis

Melisa Melisa, Eko Susilowati, Dewi Dewantara

Abstract

The STEM-based electronic module is a systematic presentation of learning materials to support students' independence with an approach in four fields of knowledge: science, technology, engineering, and mathematics. This study aims to describe the feasibility of this STEM-based electronic module to train students' creativity. The specific objectives of this study are to describe: (1) The validity of the STEM-based electronic physics module; and (2) The practicality of the STEM-based physics electronic module. The type of research was ADDIE, with the subject of the trial of 27 students at class X Science-1 in a public high school in Banjarmasin City, South Kalimantan, Indonesia. Data collection was obtained from observations, interviews, questionnaires, and tests. This research was analyzed qualitatively and quantitatively. The research results showed that: (1) the validity of the STEM-based electronic physics module was in a "very good" category, and (2) The practicality based on the implementation of the Lesson plan was categorized as "moderately practical". The existing STEM-based electronic physics modules (Science, Technology, Engineering, and Mathematics) to train students' creativity are still not suitable for learning. So, it can be concluded that the STEM-based physics electronic module is feasible to train students' creativity, and the direct result of this research was that educators could evaluate methods and media that support online learning more effectively for each meeting, and the results of this study can be used as input for teachers and teacher candidates. The next step of this research is to apply methods, learning models that support STEM and sufficient time to train students' creativity which is expected to be applied to face-to-face learning.

Keywords

Creativity; Electronic Module; STEM

Full Text:

PDF

References

Arikunto, S. (2013). Prosedur penelitian suatu pendekatan praktik. Jakarta: PT Rineka Cipta.

Arís, N., & Orcos, L. (2019). Educational robotics in the stage of secondary education: Empirical study on motivation and STEM skills. Education Sciences, 9(2).

Awad, N., & Barak, M. (2018). Pre-service science teachers learn a science, technology, engineering and mathematics (STEM)-oriented program: The case of sound, waves and communication systems. Eurasia Journal of Mathematics, Science and Technology Education, 14(4), 1431–1451.

Barak, M. (2013). Teaching engineering and technology: cognitive, knowledge and problem-solving taxonomies. Journal of Engineering, Design and Technology.

Bayyinah, R., An’nur, S., & Suriasa, S. (2014). Perbedaan keterampilan berpikir kreatif siswa terhadap strategi pembelajaran multiple intelligences dan contextual teaching learning. Berkala Ilmiah Pendidikan Fisika, 2(3).

Cahyani, A. E. M., Mayasari, T., & Sasono, M. (2020). Efektivitas e-modul project based learning berintegrasi STEM terhadap kreativitas siswa SMK. Jurnal Ilmiah Pendidikan Fisika, 4(1).

Dewantara, D. (2015). Pengaruh brainstorming dalam project based learning terhadap kemampuan analisis dan berpikir kreatif pada materi impuls-momentum. Disertasi dan Tesis Program Pascasarjana UM.

Dewantara, D., Mahtari, S., & Misbah, M. (2021). Create an interactive video about alternative energy sources from fruits to optimize student creativity. Journal of Physics: Conference Series, 1760.

Greenstein, L. (2012). Assessing 21st century skills: A guide to evaluating mastery and authentic learning. In Assessing 21st century skills: A guide to evaluating mastery and authentic learning. Crown.

Handayani, E. S., Saregar, A., & Wildaniati, Y. (2021a). Development of STEM-integrated physics e-module to train critical thinking skills: The perspective of preservice teachers. Journal of Physics: Conference Series, 1796(1). https://doi.org/10.1088/1742-6596/1796/1/012100

Handayani, E. S., Saregar, A., & Wildaniati, Y. (2021b). Development of STEM-integrated physics e-module to train critical thinking skills: The perspective of preservice teachers. Journal of Physics: Conference Series, 1796. https://iopscience.iop.org/article/10.1088/1742-6596/1796/1/012100/meta

Herak, R., & Lamanepa, G. H. (2019). Meningkatkan kreatifitas siswa melalui STEM dalam pembelajaran IPA increasing student creativity through STEM in science learning. EduMatSains: Jurnal Pendidikan, Matematika Dan Sains, 4(1), 89–98.

Inayah, A. D., Ristanto, R. H., Sigit, D. V, & Miarsyah, M. (2020). Analysis of science process skills in senior high school students. Universal Journal of Educational Research, 8(4), 15–22.

Maisaroh, Mayasari, T., & Sasono, M. (2020). Pengembangan modul elektronik berbasis real life learning untuk meningkatkan kemampuan analisis siswa smk. Jurnal Ilmiah Pendidikan Fisika, 4(1).

Mentari, I., Zainuddin, Z., & Misbah, M. (2016). Pengembangan perangkat pembelajaran fisika berorientasi kemampuan berpikir kreatif pada pokok bahasan zat dan wujudnya di smp negeri 15 banjarmasin. Berkala Ilmiah Pendidikan Fisika, 4(2).

Miriam, S., Susilowati, E., Suyidno, & Winarno, N. (2020). Optimization of renewable energy in wetlands through learning science, technology, engineering and mathematics (STEM). Proceedings of the National Seminar on Wetland Environment, 152–157.

Nurhaifa, I., Hamdu, G., & Suryana, Y. (2020). Rubrik penilaian kinerja pada pembelajaran STEM berbasis keterampilan 4C. Indonesian Journal of Primary Education, 4(1), 101–110. https://ejournal.upi.edu/index.php/IJPE/article/view/24742

Pertiwi, R. S., Abdurrahman, A., & Rosidin, U. (2017). Efektivitas LKS STEM untuk melatih keterampilan berpikir kreatif siswa. Jurnal Pembelajaran Fisika, 5(2).

Ramayanti, S., Utari, S., & Saepuzaman, D. (2017). Training students' science process skills through didactic design on work and energy. Journal of Physics: Conference Series, 895.

Sari, D. K. (2020). Pengembangan E-modul praktikum fisika dasar 1 dengan pendekatan stem untuk menumbuhkan kemandirian belajar. DWIJA CENDEKIA: Jurnal Riset Pedagogik. https://jurnal.uns.ac.id/jdc/article/view/50560

Susanti, N., Yennita, Y., & Azhar, A. (2020). Development of contextual based electronic global warming modules using flipbook applications as physics learning media in high schools. Journal of Educational …. https://jes.ejournal.unri.ac.id/index.php/JES/article/view/8072

Susilowati, E., & Dewantara, D. (2021). Pengaruh blended learning terhadap keterampilan berpikir kritis dan ketrampilan berpikir kreatif. Prosiding Seminar Nasional Lingkungan Lahan Basah, 6(2).

Tegeh, I. M., Jampe, I. N., & Pudjawan, K. (2014). Model penelitian pengembangan. Yogyakarta: Graha Ilmu.

Waluyo, R., & Wahyuni, S. (2021). Development of STEM-based physics teaching materials integrated 21st century skills (4C) and characters. Formatif: Jurnal Ilmiah Pendidikan MIPA, 11(1).

Widoyoko, E. P. (2016). Evaluasi program pembelajaran. Pustaka Pelajar.

Wulansari, D., & Madlazim. (2019). Application of guided inquiry learning model STEM method to improve creative thinking skills in global warming material. IPF: Innovation in Physics Education, 8(3), 779–783.

Yulianti, D., Wiyanto, Rusilowati, A., & Nugroho, S. E. (2020). Student worksheets based on science, technology, engineering and mathematics (STEM) to facilitate the development of critical and creative thinking skills. Journal of Physics: Conference Series, 1567(2).

Zizka, L., McGunagle, D. M., & Clark, P. J. (2021). Sustainability in science, technology, engineering and mathematics (STEM) programs: Authentic engagement through a community-based approach. Journal of Cleaner Production, 279.

DOI: http://dx.doi.org/10.20527/bipf.v9i3.10440