THE EFFECT OF IMMERSING BAY LEAF 25% ON THE MEAN SURFACE ROUGHNESS ACRYLIC RESIN TYPE HEAT

Debby Saputera, Dewi Puspitasari, Andrew Tedjohartoko

Abstract


Background: Surface roughness is one of the factor which reduce the strength of dentures. Denture cleanser that can be used is chlorhexidine, however it may cause surface roughness acrylic resin type heat cured. Natural materials that can be used as a denture cleanser is Bay leaf. Bay leaf was known to have antibacterial and antifungal activity. Purpose: This research aims to analyze the effect of immersing extract bay leaf 25% for 5 days and 15 days compared with chlorhexidine gluconate 0.2% and aquades as denture cleanser. Method: This research is true experiment using post test-only with control group design. The sample used were forty-two samples, divided into six groups immersed in extract bay leaf 25%, chlorhexidine gluconate 0.2% and aquades for 5 days and 15 days. Surface roughness was measured using Surface Roughness Tester. Results: This research shows that the mean surface roughness of acrylic type heat cured soaked for 5 days and 15 days in extract bay leaf 25% (0,45 ± 0,019) and (0,55 ± 0,012), chlorhexidine gluconate 0.2% (0,53 ± 0,024) and (0,64 ± 0,012), aquades (0,37 ± 0,015) and (0,43 ± 0,013). The One-Way Anova test showed p=0,000 (p<0,05) that there was a meaningful difference on immersing extract bay leaf 25%, chlorhexidine gluconate 0.2% and aquades. Conclusion: Immersing bay leaf 25% has lower effect on surface roughness compared with chlorhexidine gluconate.

Full Text:

PDF

References


Schmalz G, Arentholtl D. Biocompability of Dental Material. Springer Verlag Berlin Heidelberg, 2009. p. 255.

Anusavice KJ. In: Alih bahasa; Johan Arief Budiman SPE, editor. Phillips buku ajar ilmu bahan kedokteran gigi Jakarta: EGC, 2013. Hal: 197.

Dentino (Jur. Ked. Gigi), Vol II. No 2. September 2017 : 107 - 111

Maqfirah. Uji kekasaran permukaan resin akrilik heat cured setelah perendaman dalam larutan jeruk nipis (Citrus Aurantifolia) 10%. Skripsi. Banda Aceh : Fakultas Kedokteran Gigi Universitas Unsyiah, 2015. p: 1.

Mangundjaja Soeherwin, Fauziah Eva. Pengaruh Obat Kumur Klorheksidin terhadap Populasi Kuman Streptococcus mutans didalam Air Liur. Jurnal kedokteran gigi universitas Indonesia. 2011; 2(2):18.

Basker RM, Davenport JC, Tomlin HR. Perawatan Prostodontik Bagi Pasien Tak Bergigi; alih bahasa Titi S. Soebekti dan Hazmia Arsil. EGC. 3. Jakarta, 2008. Hal: 61-62.

Karlina Lilis. Efektivitas Kombinasi Ekstrak Daun Salam dan Daun Mint Sebagai Obat Kumur Alami. Skripsi. Surakarta : Universitas Muhamadiyah Surakarta, 2016. p: 6.

Noveriza R dan Miftakhurohmah. Efektivitas Ekstrak Metanol Daun Salam (Eugenia Polyantha) dan Daun Jeruk Purut (Cytrus Histrix) Sebagai Antijamur Pada Pertumbuhan Fusarium Oxysporum. Jurnal Littri. 2010. p; 16(1):6-11.

Maelani. Penetapan Kadar Fenol Total Ekstrak Etanol Daun Salam Yang Diberi Perlakuan Dètente Instantanée Côntrolée (1,5 Bar; 25 Detik ), pada Berbagai Waktu Ekstraksi. Tesis. Surabaya : Fakultas Farmasi Universitas Surabaya; 2009. p: 4.

Hardanto G, Djulaeha E, Kuntjoro M. Effect of immersion of heat cured acrylic in bay leaf extract (syzygium polyanthum {wight.} walp) on growth of candida albicans. Journal of Prosthodontics. 2012. p; 3(2):17-23.

Anisyah R, Puspitasari D, Saputera D. Perbandingan kekerasan resin akrilik tipe heat cured pada perendaman larutan desinfektan alkalin peroksida dengan ekstrak seledri (Apium Graveolens L.) 75%. ODONTO Dental Journal. 2016. p; 3(1): 35-36.

Agatha RP, Chair E, Diwya NH. Pengaruh waktu perendaman resin akrilik heat cured dalam larutan natrium bikarbonat 5% terhadap kekuatan impak. Majalah Kesehatan FK UB. 2012. p; (1):1-8.

Handayani K. Pengaruh Perendaman Resin Akrilik Heat Cured dalam larutan chlorheksidin 0.2% sebagai bahan pembersih terhadap kekasaran. Skripsi. Jember : Fakultas Kedokteran Gigi Universitas Jember, 2009. p: 8.

O’Brien, J.W. Dental Materials and Their Selection. 3rd Ed. Chicago. Quintessence, 2002. p. 32-36.

Crawford, R.J. Plastics Engineering. 3rd Ed. Oxford. Elseviere Butterworth Heinemann, 2004. p. 38-40.

Von Fraunhofer, J.A. Dental Materials at A Glance. United Kingdom. Blackwell, 2010. p. 44-49.

Chanaka S. Sifat kekasaran permukaan lempeng resin akrilik polimerisasi panas setelah direndam dalam larutan desinfektan klorheksidin glukonat 0.2%. Skripsi. Medan : Fakultas Kedokteran Gigi Universitas Sumatera Utara, 2011. p: 33.

Pribadi SB, Yogiartono TH, Agustina. Perubahan Kekuatan Impak Resin Akrilik Polimerisasi Panas dalam Perendaman Larutan Cuka Apel. Jurnal Dentofasial. 2010. p; 9(1): 13-20.

Erna F, Rostiny, Sherman S. Pengaruh Lama Perendaman Resin Akrilik Heat Cured Dalam Eugenol Minyak Kayu Manis Terhadap Kekuatan Transversa. Journal of Prosthodontics. 2012. p; 3(1):1-5.

Constantinescu IR, Ursache M, Mardarez D. Effect of pH on the surface roughness of heat cured denture base acrylic resins. Rev Med ChirSoc Met Nat Lasi. 2007. p; 111 : 477-481.

Salman M, Saleem S. effect of different denture cleanser solutions on some mechanical and physical properties of nylon and acrylic denture vase material. Journal Baghdad College Dentistry. 2011. p; 23(1):19-24.

David, Munadziroh E. Perubahan warna lempeng resin akrilik yang direndam dalam larutan desinfektan sodium hipoklorit dan klorheksidin. Majalah kedokteran gigi. 2006. p; 38(1):39-40.




DOI: http://dx.doi.org/10.20527/dentino.v2i2.4006

DOI (PDF): http://dx.doi.org/10.20527/dentino.v2i2.4006.g3599

Article Metrics

Abstract view : 722 times
PDF - 713 times

Refbacks

  • There are currently no refbacks.


Contact Us:
Faculty of Dentistry
Lambung Mangkurat University
Jalan Veteran No. 128 B Banjarmasin, Indonesia

E-mail. [email protected]
Website. fkg.ulm.ac.id

 

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.