Development of A Physics-Based E-Module Iman Taqwa-Loading CTL on Dynamic Fluid Materials

Siti Nurhafizah Adha; Fitri Nur Hikmah; Eko Wahyu Nur Sofianto

doi:10.20527/jipf.v8i1.10499

Development of A Physics-Based E-Module Iman Taqwa-Loading CTL on Dynamic Fluid Materials

Siti Nurhafizah Adha, Fitri Nur Hikmah, Eko Wahyu Nur Sofianto

Abstract

The CTL model is a model that can help teachers motivate students to make connections between the content of the material and real-life situations, and this model requires teachers to create alternative teaching materials as a guide. The development of good teaching materials that combine religious values with science. Therefore, researchers are interested in developing this e-module. This research aims to determine the validity of the product being developed, namely a physics e-module based on CTL containing implications for dynamic fluid material, and to find out how students respond to the product the researcher developed. This research is development research, and the development model used is the ADDIE development model, which consists of five stages. However, this research only reached the development stage because research aimed to develop and produce valid teaching materials based on validator assessments, and at each stage of this model, there is evaluation and revision. First, the researchers analyzed the curriculum, needs, and materials. Then, they design it, the initial design stage for developing a product. Next, the development is the stage where the previously prepared design realizes the product design. Validators consist of two physics lecturers and one physics teacher. The development trial subjects were 34 class XII, IPA 1, MAN 1, and HST students. The product validation results from material experts were 81%, and from media experts were 82%, where both of these figures are included in the very valid criteria. The results of the student response test on the product being developed were 85%, which met very good criteria. Based on these results, the physics e-module based on CTL contains imprints on dynamic fluid material is declared valid and very good. Implications development is helping teach physics in religion and dynamic fluid materials. Implications of research for helping increase learning module fluid dynamics include religion (Islamic).

Keywords

CTL; e-Module; iman taqwa; fluid dynamics

Full Text:

PDF

References

Alfad, H. (2020). Identification of students’ misconceptions in static fluid. Tarbiyah: Jurnal Ilmiah Kependidikan, 9(1). https://doi.org/http://dx.doi.org/10.18592/tarbiyah.v9i1.3233

Anafidah, A., Sarwanto, S., & Masykuri, M. (2017). Development of a physics module based on ctl (contextual teaching and learning) on particle dynamics material to improve the critical thinking skills of class x students of sman 1 ngawi. Inquiry Journal, 6(3), 29–40.

Antón-Solanas, I., Tambo-Lizalde, E., Hamam-Alcober, N., Vanceulebroeck, V., Dehaes, S., Kalkan, I., Kömürcü, N., Coelho, M.,

Coelho, T., Nova, A. C., Cordeiro, R., Sagarra-Romero, L., Subirón-

Valera, A. B., & Huércanos-Esparza, I. (2021). Nursing students’ experience of learning cultural competence. PLoS ONE, 16(12 December), 1–24. https://doi.org/10.1371/journal.pone.0259802

Aqib, Z. (2013). Model, media and contextual (innovative) learning strategies. Yrama Widya.

Asri, A. S. T., & Kusumawati, D. (2020). Validity of interactive e-modules as learning media for training visual spatial intelligence on covalent bond material. PENDIPA Journal Journal of Science Education, 6(2), 470–471.

Ayu, S., Eko, S., & Ismu, W. (2019). Development of ctl-based student worksheets on class xi high school dynamic fluid material. Journal of Physics Education, 7(1), 81–92.

Azhar, A. (2011). Characteristics of physics and the reality of national physics education. Tabularasa Journal, 8(1), 172–182.

Desnita, Festiyed, Novitra, W., Ardiva, A., & Navis, M. Y. (2020). The effectiveness of ctl-based physics e-module on the improvement of the creative and critical thinking skills of senior high school students. Technology Enginering Machine Journal, 11(2), 802–810.

Dewati, M., Bhakti, Y. B., & Astuti, I. A. D. (2019). Peranan microscope smartphone sebagai media pembelajaran fisika berbasis stem untuk meningkatkan pemahaman konsep optik. Prosiding SNFA (Seminar Nasional Fisika Dan Aplikasinya), 4(0), 36. https://doi.org/10.20961/prosidingsnfa.v4i0.35910

Dini, F. A., Supriadi, B., & Prihandono, T. (2018). Identification of understanding of dynamic fluid concepts using the four tier test in high school students. Physics Learning Journal, 7(3), 315–321.

Dini, M., Ratnawulan, R., & Usmeldi, U. (2012). Development of physics learning tools using a contextual teaching learning approach based on faith and taqwa. Journal of Physics Learning Research, 22(1), 1–14.

Eka, S., Widodo, W., & Yudhiakto, P. (2020). Development of interactive physics e-module using the sets (science, environment, technology, society) approach to improve science literacy dimension of content and process dimensions in fluid dynamics material. Indonesian Review of Physics, 3(1), 11–18.

Fasko, D. (2000). Education and creativity. Creativity Research Journal, 13(3–4), 317–327. https://doi.org/10.1207/s15326934crj1334_09

Febrianti, F. A. (2023). Development of a professional flip pdf-based digital book to improve students’ scientific literacy abilities. Scientific Journal of Basic Education, 4(2), 105–107.

Fitriah, L. (2019). Effectiveness of basic physics textbook 1 integrating imtaq and local wisdom through a direct teaching model. Scientific Periodical Journal of Physics Education, 7(2), 89–95.

Gulati, S., & Weir, C. (2022). Cultural competence in healthcare leadership education and development. Societies, 12(2). https://doi.org/10.3390/soc12020039

Hamid, E. A. (2018). Pengaruh penggunaan metode pembelajaran small group work dan media audio visual powerpoint terhadap hasil belajar kognitif siswa pada mata pelajaran Al-qur’an Hadits. Al -Mujaddid: Jurnal Ilmu-Ilmu Agama, 1(1), 32–53.

Hunaidah, L. S., Husein, H., & Vivi Hastuti, R. M. (2022). Development of the cinqase learning model e-module based on flip pdf professional to improve students’ physics learning outcomes. Learning Outcomes, Journal of Educational Dedication, 6(1), 138–148.

Irawati, R. K., & Sofianto, E. W. N. (2019). Pengembangan worksheet materi asam dan basa menggunakan model poe berbasis potensi lokal kalimantan selatan. Jurnal Inovasi Pendidikan Kimia, 12(2), 2370–2382.

Irkhamiyati, I. (2017). Evaluation Of stikes ’aisyiyah yogyakarta library preparations in building a digital library. Periodical Journal of Library and Information Science, 13(1), 37–46.

Ishaq, M. (2007). Basic physics second edition. Graha Ilmu.

Kinanti, L. P., & Sudirman, S. (2017). Feasibility analysis of material content of learning support material components in class xi sociology textbooks for state high schools in bandung city. Sosieta Journal, 7(1), 342–349.

Kuning, A. H. (2018). Piety in islam. Istiqra Journal, 6(1), 103–110.

Kurniawan, Y., & Muliyani, R. (2020). Pengaruh penerapan model pembelajaran interactive lecture experiment ( ile ) berbantuan media simulasi virtual terhadap penurunan kuantitas siswa yang miskonsepsi pada materi listrik dinamis. Jurnal Luminous: Riset Ilmiah Pendidikan Fisika. 1(1), 1–7.

Lawrence, C. (2016). Using the ADDIE model of instructional design to teach chest radiograph interpretation. Journal of Biomedical Education, 6(2).

Maison, M., Safitri, I. C., & Wardana, R. W. (2019). Identification of misconception of high school students on temperature and calor topic using four-tier diagnostic instrument. Edusains, 11(2), 195–202.

Marsuki, M. F., Amrilizia, N., & Habiddin, H. (2021). Literature Study: e-modules based on contextual teaching and learning (ctl) as the main solution to improving critical thinking ability. Journal of Science Learning, 5(2), 97–102.

Mazetha, R. S., & Eko, R. (2021). Development of a physics e-module based on multiple representation to train students problem solving skills. Journal of Coil Physics, 4(1).

Mukaromah, S. M. (2018). Pengembangan modul ipa braille berbasis integrasi islam dan sains. INKLUSI, 5(2). https://doi.org/10.14421/ijds.050203

Muttaqin, A. (2018). Konstruksi kurikulum sains islam keindonesiaan (integrasi islam, sains kealaman, sains humaniora dan keindonesiaan). EDUKASI: Jurnal Penelitian Pendidikan Agama Dan

Keagamaan, 16(1). https://doi.org/10.32729/edukasi.v16i1.460

Muzani, M. (2020). Earthquake disaster risk reduction based on islamic religious education curriculum in indonesia. International Journal of Education, Information Technology, 3(2), 245–251.

Nurhasanah, N., & Sari, L. A. (2020). Physics e-module based on contextual teaching and learning using the kvisoft flipbook maker application to improve the science literacy of class xi sma/ma students. Natural Science: Research Journal in the Field of Science and Science Education, 6(1), 31–38.

Oktaviana, D., Hartini, S., & Misbah, M. (2017). Pengembangan modul fisika berintegerasi kearifan lokal membuat minyak lala untuk melatih karakter sanggam. Berkala Ilmiah Penddikan Fisika, 5(3), 272–285. https://doi.org/http://dx.doi.org/10.20527/bipf.v5i3.3894

Purnanto, P., Arif, W., & Ali, M. (2016). Analysis of language feasibility in textbooks for theme 1 class 1 elementary school curriculum 2013. Journal of Basic Education Professionals, 3(2), 102–111.

Purniawan, P., & Sumarni, W. (2020). Analysis of student responses to online learning during the covid 19 pandemic. Proceedings of the UNNES National Postgraduate Seminar.

Puspita, W., Sutopo, S., Yuliati, L. (2019). Identifikasi penguasaan konsep fluida statis pada siswa. Momentum: Physics Education Journal, 3(1), 53–57. https://doi.org/https://doi.org/10.21067/mpej.v3i1.3346

Putra, P., & Aslan, A. (2020). Development of imtaq and science and technology based teaching materials in the era of industrial revolution 4.0 in science subjects in madrasah ibtidaiyah. Ta’limuna Journal, 9(1).

Putri, N., Rusdiana, D., & Suwarma, I. R. (2019). The comparison of student creative thinking skill using cbl implemented in stem education and combined with psl worksheet in indonesian school. Journal of Science Learning, 3(1). https://doi.org/10.17509/jsl.v3i1.17557

Rahma, N. F., & Novieastari, E. (2019). Differences in cultural competence between nursing students in academic and professional programs. Enfermeria Clinica, 29(Insc 2018), 528–531. https://doi.org/10.1016/j.enfcli.2019.04.080

Rahmat, R., & Dedy, I. (2019). Design and construction of interactive learning media for computers and basic networks in vocational schools. Vocational Journal of Electronics and Information Engineering, 7(1), 48–53.

Rara, S., Siti, M., Fera, K., & Muktiningsih, N. (2019). Development of a biochemical electronic module (e-module) on lipid metabolism material using flip pdf professiona. Tadris Kimiya Journal, 4(1), 50–58.

Ratnawati, F. A. (2018). Development of teaching materials based on edmodo-assisted problem posing learning to improve students’ understanding of concepts in dynamic fluid material. Seminar Nasional Fisika Dan Aplikasinya Universitas Negeri Semarang.

Raymond_A_Serway_John_W_Jewwett. (2006). Physics for scientists and engineers with modern physics. In Thomson Books/Cole. https://doi.org/10.1017/CBO9781107415324.004

Rijali, A. (2018). Qualitative data analysis. Alhadharah Journal, 17(33), 81–95.

Rusman. (2012). Learning models for developing teacher professionalism second edition. PT. Rajagrafindo Persada.

Sari, R. R., Tri, A., & Endang, L. (2022). Development of a physics e-module based on contextual teaching and learning (CTL) to measure physics learning outcomes in rectilinear motion material for class x sma negeri 2 lubuklinggau. Phi Journal: Journal of Physics and Applied Physics Education, 3(1).

Septiantini, T., Samsudin, A., Aminudin, A. H., Rasmitadila, R., Rachmadtullah, R., COSTU, B., & Nurtanto, M. (2022). Static fluid four-tier instrument (SFFTI): Develop and identify k-11 brebes-scholars’ alternative conception with rasch analysis. International Journal of Advanced Science and Technology, 29(7), 3190–3199.

Sugiyono. (2018). Metode penelitian kuantitatif, kualitatif dan R & D (28th ed.). Alfabeta.

Supriyadi, T. (2021). Learning model of internalization of faith and taqwa in pai learning for elementary school age. Pulpit Elementary School Journal, 3(2), 191–208.

Syaiful, A., & Rifda, E. (2019). Science and religious integration (Implications for the Development at UIN Raden Intan Lampung). Journal of Physics, 7(2), 1–9.

Tutut, R. (2018). Application of the CTL learning model to improve primary school student learning outcomes in science subjects. Scientific Journal of Education and Learning, 2(1), 12–20.

Tutut, T., & Supiana, D. N. (2019). Validity test of e-module development of biology teaching materials on the subject of interaction of living creatures with the environment based on kvisoft flipbook maker for class vii smp/mts students. Proceedings of the National Seminar on Research and Community Service.

Wahyu, I. Z., & Kusumawati, D. (2021). Validity of interactive e-modules for training visual spatial intelligence on ion bond material", in proceedings of the national seminar on chemistry (snk) department of chemistry. Proceedings of the National Seminar on Chemistry (SNK), 233–240.

Wahyuaji, N. R., & Suparman, S. (2019). Development of stem integrated e-learning design to improve student’s creative thinking capabilities. International Journal of Scientific and Technology Research, 8(10).

Wahyudi, P., Aswirna, H., & Amalina. (2020). Development of learning media based on the adobe flash application on heat, heat transfer and gas kinetic theory to improve students’ understanding of concepts. Journal of Research in the Field of Science and Science Education, 6(1), 66–72.

Wicahya, Z., & Kurnia, L. T. (2023). Penerapan nilai IMTAQ siswa melalui pembiasaan penguatan pendidikan karakter (PPK) di SMPN 21 Malang. Dirasah: Jurnal Studi Ilmu dan Manajemen Pendidikan Islam, 6(1), 153-162.

Wijaya, C. P., Handayanto, S. K., & Muhardjito, M. (2016). The Diagnosis of senior high school class x mia b students misconceptions about hydrostatic pressure concept using three-tier. Jurnal Pendidikan IPA Indonesia, 5(1), 14–21. https://doi.org/DOI: 10.15294/jpii.v5i1.5784

Yunita, I. E., & Luqman, H. (2014). Development of character-contextual learning-based modules on special journal material. Journal of Accounting Education (JPAK), 2(1), 1–6.

Zulaiha, S. (2016). Contextual teaching and learning (CTL) Approach and its implementation in PAI MI learning plans. Journal of Islamic Education, 1(1), 42–60.

DOI: https://doi.org/10.20527/jipf.v8i1.10499